Grass Valley LVS 100 v.3.15 - Manual (Page 284)

Lever Adjustment
8-4
Profile LVS Event Management System Instruction Manual
To adjust the MAX FWD position, proceed as follows:
1. Move the lever forward until the lock mechanism engages.
Maintain constant pressure while moving the lever forward.
NOTE. The action of the lock mechanism in the adjustment routine is different
from that in the system routine when you push the lever button.
2. Move the lever forward while pressing and holding the lever button until the
lever stops.
3. Press CONT.
Pressing CONT causes the instrument to adjust the MAX FWD position.
The following message appears:
[STEP 2]
1. Move lever to position FWD SPRING.
2. Push CONT key.
4. Release the lever button.
To adjust the MAX SPRING position, proceed as follows:
5. Release the lever. This causes the lever to move back automatically to the
MAX SPRING position.
6. Press CONT.
Pressing CONT causes the the instrument to adjust the MAX SPRING
position. The following message appears:
[STEP 3]
1. Move lever to position N.
2. Push CONT key.
MAX FWD Position
MAX SPRING Position