Grass Valley LVS 100 v.3.15 - Manual (Page 297)

Removal and Installation Procedures
Profile LVS Event Management System Instruction Manual
9-7
Table 9–3 lists the tools required to remove and reinstall the modules of the Live
Controller.
Table 9-3: Tools Required
Name Description Part Number
Hex wrench, 1.5 mm L-shaped or other
Hex wrench, 2 mm L-shaped or other
Hex wrench, 2.5 mm L-shaped or other
Phillips screwdriver, 5 mm Minimum 8 cm long shank is needed
Phillips screwdriver, 6 mm
Nut driver, 5.0 mm
Nut driver, 5.5 mm
Open-end wrench, 7 mm
FlatĆbladed screwdriver
Screwdriver for removing standardĆ
head screws
Long-nose pliers Standard tool
Equipment Required