Grass Valley NV9648 v.1.1 - Manual (Page 34)

24
Configuration
NV9648 Panel Configuration Page(s)
Preset Monitor None The preset source video is not sent to a monitor.
‹device› The preset source video for the selected destination appears on
the specified monitor (device).
Status Monitor None The current source video is not sent to a monitor.
‹device› The current source video for the selected destination appears on
the specified monitor (device).
Default Name Set System Name A list of “name sets” appears in the drop-down menu. The name
sets can be defined under the System Management pane of
NV9000-SE Utilities. Choose ‘System Name’ in this list if you do not
want, or do not care about, alternate device names. Do not choose
‘System Name’ if you are configuring any ‘Name Set Toggle’ but-
tons.