6 preparation for installation, 1 installation site requirements, 1 dimensions of the sunny central – SMA SC 500HE-20 Installation User Manual
Page 22: 2 ambient conditions, Preparation for installation, Installation site requirements, Dimensions of the sunny central, Ambient conditions
6 Preparation for Installation
SMA Solar Technology AG
22
SCxxxHE-20-IA-IEN111210
Installation Manual
6 Preparation for Installation
6.1 Installation Site Requirements
6.1.1 Dimensions of the Sunny Central
Figure 6: Dimensions
6.1.2 Ambient Conditions
☐ The required amount of supply air is available. If the required amount of air cannot be
guaranteed, install an extra ventilation, e.g., external fans.
☐ The installation site must be accessible at all times.
☐ The altitude of the installation site must be below the maximum installation altitude
(see section 14 "Technical Data", page 66).
☐ The ambient temperature must be within the operating temperature range
(see section 14 "Technical Data", page 66).
☐ The installation site is compliant with the requirements on ambient conditions
(see "Installation Conditions for Sunny Central 500HE/630HE/720HE/760/HE/800HE”).
Height
Width
Depth
2 093 mm
2 404 mm
906 mm
HE
906 mm
1 202 mm
100 mm
1 202 mm
2 404 mm
2 093 mm