SMA SC 500HE-20 Installation - Manual (Page 30)

7 Transporting the Sunny Central SMA Solar Technology AG
30 SCxxxHE-20-IA-IEN111210 Installation Manual
7.2 Transporting the Sunny Central with a Forklift
1. Move the forklift under the inverter from the front or
the rear. Use the fork bracket. This will prevent the
Sunny Central from slipping during transport.
2. Secure the inverter, e.g., with retaining straps, to prevent it tipping over.
3. Raise the inverter slightly.
4. Transport the inverter to the installation site.
7.3 Mounting the kick plates at the rear of the inverter
Prior to aligning the inverter on the foundation, the kick plates must be fastened in place at the rear of
the inverter.
1. Mount the kick plates at the rear of the inverter in the prescribed position.
2. Attach the kick plates to the inverter using a Torx screwdriver.
8"3/*/(
Danger of crushing if the raised Sunny Central tips over or falls during lifting.
If the inverter is raised and transported without due care or too quickly, it may tip over or fall.
• Transport the Sunny Central as close to the ground as possible at all times.
• Use all suspension points for transportation.
• Avoid fast or jerky movements with the forklift.
• Keep a safe distance from the Sunny Central at all times during transport.
• All means of transport used must be designed for the weight of the Sunny Central of 1 670 kg.
/05*$&
Damage to the inverter due to inappropriate transport.
• Never place the inverter on an unstable, uneven surface, not even for a short period of time.
• Do not transport the inverter with mounted kick plates.