4power supply units, Appearance and part names, Indicators – Yaskawa MP3200iec User Manual
Page 10
8
YASKAWA America, Inc. MP3200iec Hardware Manual YAI-SIA-IEC-5
4 Power Supply Units
4
Power Supply Units
The Power Supply Unit supplies the connected Units and Optional Modules with the power needed to operate. There are
two Power Supply Units available: an AC Power Supply Unit and a DC Power Supply Unit.
This section shows the appearance and part names of the Power Supply Unit and describes the indicators and connectors.
Appearance and Part Names
The following figure shows the appearance of the Power Supply Unit and the part names.
Indicators
These indicators show the load on the Power Supply Unit.
Note: z: Lit, {: Not lit.
Output Current
8.9 A or less
9.0 to 11.4 A
11.5 to 13.9 A
<1>
<1> Reduce the number of Optional Modules that are connected.
14.0 A or more
<1>
Load
Normal: Within power supply
capacity
Normal: Maximum power
supply capacity
Error: Over power supply
capacity
Indicator
Green
Appendix
z
z
z
{
Yellow
{
z
z
{
Red
{
{
z
{
Indicators
RLYOUT connector
Power connector
Unit connector