Connecting the cpu – Yaskawa MP3200iec User Manual
Page 22
Advertising
9 Installation
20
YASKAWA America, Inc. MP3200iec Hardware Manual YAI-SIA-IEC-5
Connecting the CPU
Note: Before you connect the CPU, install the Battery.
Refer to Installing and Replacing the Battery in the CPU on page 24
.
1. Remove the rubber cap from the connector on the Power Supply Unit.
Note:
• When the connector is not in use, always cover it with the rubber cap.
• The left-side cap is marked with an L, and the right-side cap is marked with an R.
2. Connect the Power Supply Unit and the CPU Unit from left to right in this order.
Advertising