9installation – Yaskawa MP3200iec User Manual
Page 19
Advertising
9 Installation
YASKAWA America, Inc. MP3200iec Hardware Manual YAI-SIA-IEC-5
17
9
Installation
You can use either of the following methods to install an MP3200iec Series Controller.
• Screw mounting
• DIN rail mounting
Screw Mounting
You can install the Unit by using the Screw Mounting Attachment.
Note: You can install the Unit by using the Screw Mounting Attachment.
• JEPMC-OP3001
This Attachment is provided with the Power Supply Unit. It can be installed on the PMC-U-MP320**.
• JEPMC-OP3002
This Attachment is provided with the MBU-B03, MBU-B05, and MBU-B08. It can be purchased separately.
The installation procedure is as follows:
1. Attach the Screw Mounting Attachment to the right end of the Controller.
Screw Mounting Attachment
Advertising