Hex monitor – Yaskawa VCD 723 User Manual
Page 55
3
Operation
49
9/15/93
In addition, the lights on the LCDU will appear to bubble up showing that
the transfer is taking place.
•
When the transfer is complete, the function entry mode will return.
❏ For a Parameter Download:
•
A message appears explaining that the VCD 723 is attempting to start the
parameter transfer.
•
At this time, the VCD 723 is waiting to communicate with the PC. When
the transfer begins, a message will appear showing how much of the
transfer has already taken place. For a baud rate of 19200, the transfer
will take approximately 30 seconds. The completion percent number
counts up as more data is transferred.
Completion:
23%
UPLOAD/DOWNLOAD
(press ENT) T992
Function number 999 is used to directly view memory values. A memory map is
required, and as such, it is reserved for use by MagneTek personnel.
Hex Monitor
(T999)
DCU HEX MONITOR
(press ENT) T999
Hex Monitor
Start DOWNLOAD
of Parameters