Yaskawa MP2000 Series - Manual (Page 16)

Page 16
TM.MP2000.02, 1/18/2011
Data subject to change without notice
Yaskawa America, Inc.
Á
2.3 Cable Specifications
Yaskawa Standard Coaxial Cable Specifications
The coaxial cable uses the same item as the GL120 remote I/O system. The type and specifications of the Yaskawa
standard coaxial cable are shown below.
Model Cable Length Coaxial Cable Specifications Notes
JZMSZ–W60–1 2 m (6.6 ft)
3C-2V (for in-panel use) Both ends w/ BNC connector JZMSZ–W60–2 3 m (9.8 ft)
JZMSZ–W60–3 5 m (16.4 ft)
JZMSZ–W61–1 2 m (6.6 ft)
5C-FB (for panel-to-panel use)
• Both ends w/ F-connector (F-5FB)
• Contact gold plating JZMSZ–W61–2 5 m (16.4 ft)
JZMSZ–W61–3 10 m (32.8 ft)
JZMSZ–W61–4 20 m (65.6 ft)
Other Coaxial Cable Specifications
The types and specifications of the coaxial cable manufactured by Fujikura Ltd. are shown below.
Model
Manufactured by
Fujikura, Ltd.
Static
Electricity/Electromagnetic
Shield
Application Use Conditions
Signal Attenuation: Pas(dB/Km)
0.5MHz 1MHz 2MHz 4MHz
3C-2V None
For in-panel
use
Dedicated
Ducts
9.0 12.0 17.0 25.0
3C-2V (Cu, Fe) ZV Yes
For in-panel
use
Low-voltage
ducts
5C-2V None
For
panel-to-panel
use
Dedicated
Ducts
5.1 7.6 11.0 16.0
5C-2V (Cu, Fe) ZV Yes
For
panel-to-panel
use
Low-voltage
ducts
5C-FB None
For
panel-to-panel
use
Dedicated
Ducts
4.8 7.4 10.5 14.0
5C-FB (Cu, Fe) ZV Yes
For
panel-to-panel
use
Low-voltage
ducts
7C-FB None
For
panel-to-panel
use
Dedicated
Ducts
4.2 5.8 7.6 10.0
7C-FB (Cu, Fe) ZV Yes
For
panel-to-panel
use
Low-voltage
ducts
7C-FL None
For
panel-to-panel
use
Dedicated
Ducts
2.9 3.8 5.6 8.1
7C-FL (Cu, Fe) ZV Yes
For
panel-to-panel
use
Low-voltage
ducts
12C-5AF None
For
panel-to-panel
use
Dedicated
Ducts
1.46 2.2 3.2 4.5
12C-5AF (Cu, Fe) ZV Yes
For
panel-to-panel
use
Low-voltage
ducts
(Note) 1 Coaxial cables from other manufacturers may be used if equivalent to the above.
2 Signal Attenuation: Pas (dB/Km) is the standard value.