Yaskawa MP2000 Series - Manual (Page 25)

Page 25
MP2000.02, 1/18/2011
Data subject to change without notice
Yaskawa America, Inc.
Restrictions During I/O Map Assignment
•
Unidirectional scan I/O deletion is possible (Ex: "LI" " is OK)
• Scan classification change is possible (Ex: "LI"
• A change between Input and Output is not possible (Ex: "LI"
3.5 Link Status
This displays the data actually being link-transmitted by the PCLINK-01. This is for display only, and modification of
the individual settings is not possible.
Link Status Screen
ST#
This displays the station number. The local station number is displayed as "**".
L-REG
In the case of the local station, the address actually being output is displayed. In the case of other stations, the
addresses actually being input are displayed. Nothing is displayed in off-line mode.
WORD
In the case of the local station, the data size actually being output is displayed. In the case of other stations, the
data size actually being input is displayed. Nothing is displayed in off-line mode.
REG-No
This displays the REG-No set in the "I/O Assignment" tab.