Yaskawa MP2000 Series - Manual (Page 23)

Page 23
MP2000.02, 1/18/2011
Data subject to change without notice
Yaskawa America, Inc.
COIL REG-No
Input the lead register number when performing link coil I/O with each station. Input the O register number of local
stations, and I register numbers for the other stations.
Set so that there is no register duplication between the stations.
CREG WORD
This sets the number of link register I/O words.
The maximum assignments per station is 256 words, combining links and coils.
COIL-No
This displays the lead coil numbers during link coil I/O. Input is not possible.
The register numbers input in COIL REG-No are displayed in the coil number format.
BIT
This displays the number of link coil I/O bits. Input is not possible. The number of link coil I/O words input in
CREG-WORD is shown in the number of bits.
SCAN
This selects the scan performing input and output between the CPU module and the PCLINK-01 from "High/Low".
In the case of a local station, there will be a transmission data output scan, and in the case of other stations, a
reception data input scan.
In the case of the local station, set the same scan as the SYNC-SCAN setting.
Station Name
Input the station comments in 32 characters.