Yaskawa MP2000 Series - Manual (Page 7)

Page 7
MP2000.02, 1/18/2011
Data subject to change without notice
Yaskawa America, Inc.
(3) MEMOBUS Relay from Serial Port
MEMOBUS messaging communication with stations connected to the PCLINK network after connecting an
upper-level computer (such as an ACGC) or a display to the serial port of an MP2000 series PCLINK-01 module. (The
serial port of the PCLINK-01 module supports only MEMOBUS slave functions.)
Figure 1.5 MEMOBUS Message via Serial Port Transmission Connection Diagram
1.3.3 Engineering Messages from the Serial Port
By connecting an engineering tool MPE720 to the serial port of an MP2000 series PCLINK-01 module, it is possible
to connect to a local MP2000 series controller, as well as an MP2000 series control on a PCLINK network. Program
editing and monitoring are possible.
Figure 1.6 Engineering Tool via Serial Port Transmission Connection Diagram