Epson FX-980 - Manual (Page 138)

6-2 Using EPSON Status Monitor 2
R4C3430
Rev. C
A5 size CHAP6.FM
5/4/99 Pass 0
L Proof Sign-off:
E.Omori _______
<Kimura> _______
<Editor Name> _______
About the EPSON Status Monitor 2 Utility
The EPSON Status Monitor 2 utility comes with your printer but
is available only for use with Windows 95 or 98. It allows you to
monitor your printer’s status, alerts you when printer errors
occur, and provides troubleshooting instructions when needed.
You can install the EPSON Status Monitor 2 utility when you
install the printer driver, or you can install it at a different time as
described on the next page.
Note:
To monitor an FX-980 printer on a network, you must install an optional
Ethernet interface card (C823623 or C823633) in your printer and use
the Status Monitor utility that comes with this card. See the manual that
comes with the interface card for instructions on using the Status
Monitor in a network environment.
Before using the Status Monitor, be sure to read the README file
in the EPSON folder on your hard drive. This file contains the
latest information on the Status Monitor.