Epson FX-980 - Manual (Page 33)

1
Setting Up the Printer 1-9
R4C3430
Rev. C
A5 size CHAP1.FM
5/4/99 Pass 0
R Proof Sign-off:
E.Omori _______
<Kimura> _______
<Editor Name> _______
7. Hold the cartridge with the ribbon-tightening knob up. Fit the
two front notches of the ribbon cartridge over the small pegs
on each side of the printer as shown below. Then lay the
cartridge flat.
8. Make sure that the two rear notches of the cartridge fit over
the small pegs on each side of the printer. Then gently press
down the cartridge until both ends click into place.
1-5a.eps
1-5b.eps