Epson FX-980 - Manual (Page 95)

3-6 Printing on Single Sheets
R4C3430
Rev. C
A5 size CHAP3.FM
5/4/99 Pass 0
L Proof Sign-off:
E.Omori _______
<Kimura> _______
<Editor Name> _______
Loading envelopes
You can load envelopes in the top paper slot only, as described in
“Loading Single Sheets in the Top Paper Slot” on page 3-8. Also
follow these guidelines:
R Load envelopes one at a time in the top slot, with the flap fold
first and the flap side up.
R Set the paper thickness lever (located under the printer cover)
to position 4 or 5 to match the thickness of the envelope.
R Before printing, turn on the card mode by pressing the
Tear Off/Bin button until both Tear Off/Bin lights are on.
After you finish printing on envelopes, press the Tear Off/Bin
button once to exit the card mode. (Bin 1of the optional cut-
sheet feeder is selected.)
R Do not use envelopes that are curled or folded. Also avoid
using envelopes that are too thin; they may curl during
printing and become jammed.
R If you are using No. 6 envelopes, align the left edge of the
envelope with the arrow mark on the printer.
flap side up,
printable side down
New01.eps