Epson FX-980 - Manual (Page 232)

IN - 3
R
R4C3430
Rev. C
A5 size SUNGN.IX
5/4/99 Pass 0
Proof Sign-off:
<Crestec> _______
<Kimura> _______
<Crestec> _______
installing
for DOS, 1-22
for Windows 3.1, 1-20 to 1-21
for Windows 98, 95,
1-18 to 1-20
for Windows NT 3.5x,
1-20 to 1-21
for Windows NT 4.0,
1-18 to 1-20
setting
for Windows 3.1, 4-11 to 4-12
for Windows 95 or 98,
4-5 to 4-8
for Windows NT 3.5x,
4-21 to 4-22
for Windows NT 4.0,
4-15 to 4-17
Printer software
installing, 1-17 to 1-22
Printer Status window, 6-11 to 6-12
Print head caution symbol, 12
Printing on
continuous paper, 2-1 to 2-43
single sheets, 3-1 to 3-13
Pull tractor, 5 to 6, A-3
Pull tractor position, 2-3
Push tractor, 4 to 5
R
Rear push tractor, 2-6 to 2-11
Rear push tractor position, 2-3
Removing
front push tractor, 2-18 to 2-19
paper tension unit, 2-22
printed document from
front push tractor,
2-17 to 2-18
pull tractor, 2-28
rear push tractor, 2-10 to 2-11
pull tractor, 2-31 to 2-33
roll paper, A-19
Ribbon cartridge, 10, 1-6 to 1-11
Ribbon guide, 1-8
Ribbon installation position, 1-7
Ribbon-tightening knob, 1-10
Roll paper
loading, A-16 to A-18
removing, A-19
Roll paper holder, A-3, A-13 to A-19
assembling, A-13 to A-15
installing, A-15
S
Safety instructions, 10 to 11
Second bin cut-sheet feeder, A-2
Selecting
built-in font, 5-2
pitch, 5-3
Self test, 7-18 to 7-19
Separator
ribbon, 1-8
Serial interface, 1-16
Setting
paper release lever, 2-2 to 2-3
paper thickness lever, 2-4 to 2-5
Setup, 4-16
Single-sheet
position, 2-2
printing, 8 to 9, 3-1 to 3-13
problems, 7-6 to 7-7
Specifications
CE marking, C-13
electrical, C-4
environmental, C-4
mechanical, C-2 to C-4
paper, C-5 to C-8
paper alignment, C-8 to C-9
printable area, C-10 to C-12
safety approvals, C-13
Switching
between continuous paper and
single sheet, 2-36 to 2-37