Loading roll paper – Epson FX-980 User Manual
Page 186
A-16
Enhancing Your Printer With Options
R4C3430
Rev. C
A5 size
APPA.FM
5/4/99
Pass 0
L
Proof Sign-off:
<Crestec>
_______
<Yamanouchi>
_______
<Crestec>
_______
c
Caution:
The roll paper holder is not fastened to the printer; only the
printer’s weight and the two positioning pegs hold it in place. If
you pick up the printer, be careful not to drop the roll paper
holder.
To remove the roll paper holder, carefully lift up the printer and
pull out the roll paper holder from beneath the printer.
Loading roll paper
After you install the roll paper holder, follow the steps below to
load a roll of paper,
1. Make sure the printer is turned off. Open the paper guide
cover and remove the paper guide base.
2. Make sure the paper tension unit is installed.
3. Set the paper thickness lever (located under the printer cover)
to the proper position for the thickness of your roll paper.
4. Set the paper release lever to the single-sheet position.
5. Cut the leading edge of the roll paper straight across.
G3-43.eps
New08.eps