Epson FX-980 - Manual (Page 28)

1-4 Setting Up the Printer
R4C3430
Rev. C
A5 size CHAP1.FM
5/4/99 Pass 0
L Proof Sign-off:
E.Omori _______
<Kimura> _______
<Editor Name> _______
Choosing a Place for the Printer
Follow the guidelines below when selecting a location for your
printer.
R Place the printer on a flat, stable surface. The printer will not
operate properly if it is tilted or at an angle.
R Place the printer where you can easily connect it to a network
interface cable, if necessary.
R Leave adequate room around the printer for easy operation
and maintenance.
R Avoid using or storing the printer in places subject to rapid
changes in temperature and humidity. Keep it away from
direct sunlight, strong light, heat sources, or excessive
moisture or dust.
R Avoid places subject to shocks and vibrations.
R Place the printer near a wall outlet where you can easily
unplug the power cord.
R Avoid electrical outlets controlled by wall switches or
automatic timers. An interruption in power can erase
information in the memory of your printer or computer.
Also avoid outlets on the same circuit as large motors or
other appliances that can cause voltage fluctuations.
R Keep the entire computer system away from potential sources
of electromagnetic interference, such as loudspeakers or the
base units of cordless telephones.