Epson FX-980 - Manual (Page 139)

6
Using EPSON Status Monitor 2 6-3
R4C3430
Rev. C
A5 size CHAP6.FM
5/4/99 Pass 0
R Proof Sign-off:
E.Omori _______
<Kimura> _______
<Editor Name> _______
Installing EPSON Status Monitor 2
Note:
If you installed the Status Monitor when you installed the printer
software, you do not need to install it again.
To use the Status Monitor 2, you need to install the software as
follows:
1. Insert the CD-ROM containing the printer software into the
CD-ROM drive. The AutoPlay function of the CD-ROM drive
automatically starts the installation program on the CD-ROM.
Note:
If a dialog box appears, click
Cancel .
If the installation program does not start automatically, click
on
Start and then on Run . In the Run dialog box, enter
E:\START.EXE in the command line and click on the OK
button.
Note:
If your CD-ROM drive has a drive letter other than "E", substitute
the appropriate letter.
2. The subsequent procedure is menu-driven. Select the option
to install EPSON Status Monitor 2 and follow the on-screen
instructions.
3. Click Finish to complete the installation.
4. After the printer software has been successfully installed,
click on the button identified by a door icon to exit the
installation program.