Epson FX-980 - Manual (Page 196)

C-2 Specifications
R4C3430
Rev. C
A5 size APPC.FM
5/4/99 Pass 0
L Proof Sign-off:
<Crestec> _______
<Kimura> _______
<Crestec> _______
Printer Specifications
Mechanical
Printing method: 9-pin impact dot matrix
Printing speed: High speed draft 506 cps at 10 cpi
569 cps at 12 cpi
569 cps at 15 cpi
560 cps at 17 cpi
506 cps at 20 cpi
Draft 380 cps at 10 cpi
Near letter quality 95 cps at 10 cpi
Printing direction: Bidirectional logic seeking for text and
graphics printing. Unidirectional text or
graphics printing can be selected using
software commands.
Line spacing: 1/6-inch or programmable in 1/216-inch
increments
Printable columns: 80 columns (at 10 cpi)
Resolution: Maximum 240
×
144 dpi maximum (near letter
quality)
Interfaces: One standard bidirectional, 8-bit, parallel
interface with IEEE 1284 nibble mode support,
one serial interface and one optional interface
slot
Paper feed methods: Friction (front or top paper entry)
Push tractor (front or rear paper entry)
Pull tractor (front, bottom, or rear paper entry)
Push and pull tractor (additional tractor is
required for front push and pull tractor
combination.)
Cut-sheet feeder (optional)
Roll paper holder (optional)