RISCO Group axesplus® MAP Editor - Manual (Page 21)

User Manual for MAP Editor
Uncontrolled when printed © RISCO Group 13
Figure 10: Add a Location
2. Enter the name of the location as per the requirement in the Location Name field.
3. Click OK. The location is added to section and appears in the Project Explorer.
Figure 11: New Location Added
Add as many locations as required. You may remove or rename the location.
4.2 Rename the Location
To rename the location:
1. On the Project Explorer window, select a location.
2. Right-click <location name>
→ Rename. The Rename dialog box appears.