TA Triumph-Adler DC 2435 User Manual
Page 211
About Network FAX
9-5
9
3
Select settings on the FAX Setting tab.
1
Specify fax settings such as the original size
on the FAX Setting tab, and click [OK].
2
You will return to the Print dialog box for the
application. Click [OK]. The Transmit Settings
dialog box will appear.
4
Select settings in the Transmit Settings dialog box.
You can specify settings such as a transmission
time or a sub-address in the Transmit Settings
dialog box.
NOTE:
For details on the settings, refer to Network
FAX Driver Operation Guide.
5
Specify a cover page.
To include a cover page, select settings on the
[Cover Page] tab.
NOTE:
For details on the settings, refer to Network
FAX Driver Operation Guide.
6
Set the destination.
1
Use the keyboard to enter the destination fax
number.
2
Click [Add to Destination List]. The destination
information will appear in the address list. To
send to multiple destinations, repeat this
operation.
3
To use the Address Book, click [Select from
Address Book] and select the destination.
NOTE:
For the procedures for using and registering
destinations in the Address Book, refer to Network FAX
Driver Operation Guide.
7
Click [Send]. Transmission will begin.