TA Triumph-Adler DC 2435 - Manual (Page 88)

FAX Operation (Advanced)
4-20
Using Requirements for All Receptions
By applying the requirements to all receptions, you can have all faxes that you receive be printed or forwarded
based on the requirements.
To use requirements for all receptions, use the following procedure.
NOTE: To register setting by each reception requirement, refer to Using Rule for Specific RX on page 4-22.
To change the entry contents, follow the same operation.
When using requirments for all receptions, received documents can not be stored in the FAX Box.
1 Press the System Menu key.
2 Press [FAX], and then [Next] of RX/Forward
Requirements.
3 Press [Use Requirements for All RX].
4 Press [Next] of Forward Setting.
5 Press [Change] of Forwarding.
6 Select [On] or [Off] whether to forward or not to
forward the received documents and press [OK].
7 Press [Change] of Forward Destination.
8 Set the Forwarding Destination. Select the other
party by pressing one of the following keys, and
press [OK] to add the other party to the list.
NOTE: You can register multiple destinations. By
setting a group as the destination, you can specify up
to 500 recipients.
FAX - RX/Forward Requirements
Print or forward the received file according to
requirements.
Cancel OK
Off
Change Setting
by Requirement
Use Rule for
All RX
Forward Settings:
Print:
Off
Activating Time:
Next
Change
Change
1/2
All Day
10/10/2010 10:10 Status
FAX - Forward Destination
Cancel OK
Address
Book
E-mail Addr
Entry
Folder Path
Entry
FAX No.
Entry
Detail/Edit Delete
Dest Detail
1/1
i-FAX Addr
Entry
10/10/2010 10:10 Status
ABC 012345678
GHI
DEF 9876543210
abc@efg