Avago Technologies LSI53C1010R - Manual (Page 223)

SCSI Registers 4-105
Version 2.2 Copyright © 2000–2003 by LSI Logic Corporation. All rights reserved.
Note: The receive rate is independent of the settings of the
XCLKS_DT, XCLKS_ST, XCLKH_DT, and XCLKH_ST bits.
Synchronous Send Rate Calculation
The synchronous send rate, in megatransfers/s, can be
calculated using the following formula:
Send Rate (ST)
Input Clock Rate
SCFDivisor 4 XCLKS_ST XCLKH_ST
)
+ +
( ×
------------------------------------------------------------------------------------------------------------------------ =
Send Rate (DT)
Input Clock Rate
SCFDivisor 2
XCLKS_DT XCLKS_ST + XCLKH_DT + XCLKH_ST +
2
------------------------------------------------------------------------------------------------------------------------------------------------- 

+  
 
Ч



------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- =