Avago Technologies LSI53C1010R - Manual (Page 28)

1-10 Introduction
Version 2.2 Copyright © 2000–2003 by LSI Logic Corporation. All rights reserved.
•
Reduced SCSI development effort.
•
Compiler-compatible with existing LSI Logic SCSI SCRIPTS
processors.
•
Direct connection to PCI and SCSI SE and LVD.
•
Development tools and sample SCSI SCRIPTS available.
•
Maskable and pollable interrupts.
•
Wide SCSI, A or P cable, and up to 15 devices per SCSI channel
are supported.
•
Three programmable SCSI timers: Select/Reselect,
Handshake-to-Handshake, and General Purpose.
•
Software for PC-based operating system support.
•
Support for relative jumps.
•
SCSI Selected As ID bits for responding with multiple IDs.
1.6.5 Flexibility
The following features increase the flexibility of the LSI53C1010R:
•
Universal LVD transceivers are backward compatible with SE devices.
•
High level programming interface (SCSI SCRIPTS).
•
Programs local and bus flash memory.
•
Tailored SCSI sequences execute from main system RAM or internal
SCRIPTS RAM.
•
Flexible programming interface to tune I/O performance or to adapt
to unique SCSI devices.
•
Support for changes in the logical I/O interface definition.
•
Low level access to all registers and all SCSI bus signals.
•
Fetch, Master, and Memory Access control pins.
•
Separate SCSI and system clocks.
•
SCSI clock quadrupler bits enable Ultra160 SCSI transfer rates with
a 40 MHz SCSI clock input.
•
Selectable IRQ pin disable bit.
•
Compatible with 3.3 V and 5 V PCI.