PLANET GS-4210-24P2S - Manual (Page 200)

User’s Manual of GS-4210-24P2S
4.9.2.3 802.1X Port Setting
This page allows you to configure the IEEE 802.1X Port Setting. The 802.1X Port Setting screens in Figure 4-9-9 & Figure
4-9-10 appear.
Figure 4-9-9: 802.1X Port Setting Page Screenshot
The page includes the following fields:
Object Description
 Port Select port for this drop down list.
 Mode If NAS is globally enabled, this selection controls the port's authentication mode.
The following modes are available:

No Authentication

Authentication

Force Unauthorized
 In this mode, the switch will send one EAPOL Failure frame when the
port link comes up, and any client on the port will be disallowed network
access.

Force Authorized
In this mode, the switch will send one EAPOL Success frame when the
port link comes up, and any client on the port will be allowed network
access without authentication.
 Reauthentication
Enable
If checked, successfully authenticated supplicants/clients are reauthenticated
after the interval specified by the Reauthentication Period. Reauthentication for
802.1X-enabled ports can be used to detect if a new device is plugged into a
200