PLANET GS-4210-24P2S - Manual (Page 246)

User’s Manual of GS-4210-24P2S
Syn Specify the TCP "Synchronize sequence numbers" (SYN) value for this
ACE.

Set : TCP frames where the Syn field is set must be able to match
this entry.

Unset : TCP frames where the Syn field is set must not be able to
match this entry.

Don’t Care : Any value is allowed ("don't-care").
Fin Specify the TCP "No more data from sender" (FIN) value for this ACE.

Set : TCP frames where the Fin field is set must be able to match
this entry.

Unset : TCP frames where the Fin field is set must not be able to
match this entry.

Don’t Care : Any value is allowed ("don't-care").
 Type of Service Specify the type pf service for this ACE.

Any : No specifc type of service is specified (destination port status is
"don't-care").

DSCP to match : If you want to filter a specific DSCP with this ACE, you can
enter a specific DSCP value. A field for entering a DSCP value appears. The
allowed range is 0 to 63. A frame that hits this ACE matches this DSCP
value.

IP Recedence to match : If you want to filter a specific IP recedence with this
ACE, you can enter a specific IP recedence value. A field for entering an IP
recedence value appears. The allowed range is 0 to 7. A frame that hits this
ACE matches this IP recedence value.
 ICMP Specify the ICMP for this ACE.

Any : No specifc ICMP is specified (destination port status is "don't-care").

Select from List : If you want to filter a specific list with this ACE, you can
select a specific list value.

Protocol ID to match : If you want to filter a specific protocol ID filter with this
ACE, you can enter a specific protocol ID value. A field for entering a
protocol ID value appears. The allowed range is 0 to 255. A frame that hits
this ACE matches this protocol ID value.
 ICMP Code Specify the ICMP code filter for this ACE.

Any : No ICMP code filter is specified (ICMP code filter status is
"don't-care").

User Defined : If you want to filter a specific ICMP code filter with this
ACE, you can enter a specific ICMP code value. A field for entering an
ICMP code value appears. The allowed range is 0 to 255. A frame that
hits this ACE matches this ICMP code value.
246