5 clock command, 6 dos command – PLANET GS-4210-24P2S User Manual

Page 327

Advertising
background image

User’s Manual of GS-4210-24P2S

6.3.5 clock Command

Description:

Manage the system clock

Syntax:

clock source local / sntp

clock summer-time

clock timezone

6.3.6 dos Command

Description:

DoS information

Syntax:

dos

daeqsa-deny Destination MAC equals to source MAC

icmp-frag-pkts-deny Fragmented ICMP packets

icmp-ping-max-length DoS information

icmpv4-ping-max-check Check ICMPv4 ping maximum packets size

icmpv6-ping-max-check Check ICMPv6 ping maximum packets size

ipv6-min-frag-size-check Check minimum size of IPv6 fragments

ipv6-min-frag-size-length DoS information

land-deny Source IP equals to destination IP

nullscan-deny NULL Scan Attacks

pod-deny Ping of Death Attacks

smurf-deny Smurf Attacks

smurf-netmask DoS information

syn-sportl1024-deny SYN packets with sport less than 1024

synfin-deny SYN and FIN bits set in the packet

synrst-deny SYNC and RST bits set in the packet

tcp-frag-off-min-check TCP fragment packet with offset equals to one

tcpblat-deny Source TCP port equals to destination TCP port

tcphdr-min-check Check minimum TCP header

tcphdr-min-length DoS information

udpblat-deny Source UDP port equals to destination UDP port

xma-deny Xmascan: sequence number is zero and the FIN, URG and PSH bits are set

327

Advertising