PLANET GS-4210-24P2S - Manual (Page 91)

User’s Manual of GS-4210-24P2S

Auto-10/100M - Setup 10/100M Auto negotiation.

10M - Setup 10M Force mode.

100M - Setup 100M Force mode.

1000M - Setup 1000M Force mode.
 Flow Control When Auto Speed is selected for a port, this section indicates the flow control
capability that is advertised to the link partner.
When a fixed-speed setting is selected, that is what is used.
Current Rx column indicates whether pause frames on the port are obeyed.
Current Tx column indicates whether pause frames on the port are transmitted.
The Rx and Tx settings are determined by the result of the last Auto-Negotiation.
Check the configured column to use flow control.
This setting is related to the setting for Configured Link Speed.
Possible state are:
Enabled - Start up the Flow Control manually.
Disabled - Shutdown the Flow Control manually.
Button
: Click to apply changes.
Figure 4-4-7: LAG Port Status Page Screenshot
The page includes the following fields:
Object Description

LAG The LAG for the settings contained in the same row.
 Description Display the current description.
 Port Type Display the current port type.
 Enable State Display the current enable state.
 Link Status Display the link status of per LAG group.
91