PLANET GS-4210-24P2S - Manual (Page 24)

User’s Manual of GS-4210-24P2S
24
2.2 Installing the Switch
This section describes how to install your PoE Managed Switch and make connections to the PoE Managed Switch. Please
read the following topics and perform the procedures in the order being presented. To install your PoE Managed Switch on a
desktop or shelf, simply complete the following steps.
2.2.1 Desktop Installation
To install the PoE Managed Switch on desktop or shelf, please follow these steps:
Step1: Attach the rubber feet to the recessed areas on the bottom of the PoE Managed Switch.
Step2: Place the PoE Managed Switch on the desktop or the shelf near an AC power source, as shown in Figure 2-1-4 .
Figure 2-1-4: Place the PoE Managed Switch on the desktop
Step3: Keep enough ventilation space between the PoE Managed Switch and the surrounding objects.
When choosing a location, please keep in mind the environmental restrictions discussed in Chapter 1,
Section 4, and specifications.
Step4: Connect the PoE Managed Switch to network devices.
Connect one end of a standard network cable to the 10/100/1000 RJ-45 ports on the front of the PoE Managed Switch .
Connect the other end of the cable to the network devices such as printer server, workstation or router.
Connection to the PoE Managed Switch requires UTP Category 5 network cabling with RJ-45 tips. For
more information, please see the Cabling Specification in Appendix A.