PLANET LRP-822CS - Manual (Page 201)

User’s Manual of LRP-822CS
201
Figure 4-8-16 Ingress Bandwidth Control Settings Page Screenshot
The page includes the following fields:
Object Description
 Port Select port number from this drop-down list
 State Enable or disable the port rate policer. The default value is "Disabled".
 Rate (Kbps) Configure the rate for the port policer. The default value is "unlimited". Valid
values are in the range 0 to 1000000.
Buttons
: Click to apply changes.
Figure 4-8-17 Ingress Bandwidth Control Status Page Screenshot
The page includes the following fields:
Object Description
 Port The switch port number of the logical port
 Ingress Rate Limit (Kbps) Display the current ingress rate limit