PLANET LRP-822CS User Manual
Page 248
Advertising
User’s Manual of LRP-822CS
248
The page includes the following fields:
Object
Description
Port
Select port from this drop-down list
State
Set default or user-define
Rate Limit (pps)
Configure the rate limit for the port policer. The default value is "unlimited". Valid
values are in the range 1 to 300.
Buttons
: Click to apply changes
Figure 4-9-43 DHCP Rate Limit Setting Page Screenshot
The page includes the following fields:
Object
Description
Port
The switch port number of the logical port
Rate Limit (pps)
Display the current rate limit
Advertising