PLANET LRP-822CS - Manual (Page 219)

User’s Manual of LRP-822CS
219
Figure 4-9-7 Guest VLAN Setting Page Screenshot
The page includes the following fields:
Object Description
 Guest VLAN ID This is the value that a port's Port VLAN ID is set to if a port is moved into the
Guest VLAN. It is only changeable if the Guest VLAN option is globally enabled.
Valid values are in the range [1~4094].
 Guest VLAN Enabled A Guest VLAN is a special VLAN - typically with limited network access - on
which 802.1X-unaware clients are placed after a network administrator-defined
timeout. The switch follows a set of rules for entering and leaving the Guest
VLAN as listed below.
The "Guest VLAN Enabled" checkbox provides a quick way to globally
enable/disable Guest VLAN functionality.
 When checked, the individual ports' ditto setting determines whether the
port can be moved into Guest VLAN.
 When unchecked, the ability to move to the Guest VLAN is disabled for
all ports.
 Guest VLAN Port
Setting When Guest VLAN is both globally enabled and enabled (checked) for a given
port, the switch considers moving the port into the Guest VLAN according to the
rules outlined below.
This option is only available for EAPOL-based modes, i.e.:
• Port-based 802.1X