PLANET LRP-822CS - Manual (Page 231)

User’s Manual of LRP-822CS
231
Figure 4-9-21 Telnet Information Page Screenshot
The page includes the following fields:
Object Description
 Telnet Service Display the current Telnet service
 Login Authentication List Display the current login authentication list
 Enable Authentication List Display the current enable authentication list
 Session Timeout Display the current session timeout
 Password Retry Count Display the current password retry count
 Silent Time Display the current silent time
 Current Telnet Session
Count Display the current Telnet session count
4.9.5.2 SSH
Configure SSH on this page. This page shows the Port Security status. Port Security is a module with no direct configuration.
Configuration comes indirectly from other modules -- the user modules. When a user module has enabled port security on a
port, the port is set up for software-based learning. In this mode, frames from unknown MAC addresses are passed on to the
port security module, which in turn asks all user modules whether to allow this new MAC address to forward or block it. For a
MAC address to be set in the forwarding state, all enabled user modules must unanimously agree on allowing the MAC address
to forward. If only one chooses to block it, it will be blocked until that user module decides otherwise.