PLANET XGSW-28040 - Manual (Page 131)

User’s Manual of XGSW-28040
Figure 4-6-19 Protocol to Group Mapping Table page screenshot
The page includes the following fields:
Object Description
 Delete To delete a Protocol to Group Name map entry, check this box. The entry will be
deleted on the switch during the next Save.
 VCE ID Indicates the index of the entry. It is user configurable. It's value ranges from
0-256. If a VCE ID is 0, application will auto-generate the VCE ID for that entry.
Deletion and lookup of IP subnet-based VLAN are based on VCE ID.
 IP Address Indicates the IP address.
 Mask Length Indicates the network mask length.
 VLAN ID Indicates the VLAN ID. VLAN ID can be changed for the existing entries.
 Port Members A row of check boxes for each port is displayed for each IP subnet-based VLAN
entry. To include a port in a IP subnet-based VLAN, check the box. To remove or
exclude the port from the IP subnet-based VLAN, make sure the box is
unchecked. By default, no ports are members, and all boxes are unchecked.
 Adding a New IP
subnet-based VLAN
Click “Add New Entry” to add a new IP subnet-based VLAN entry. An empty row
is added to the table, and the IP subnet-based VLAN entry can be configured as
needed. Any IP address/mask can be configured for the IP subnet-based VLAN
entry. Legal values for a VLAN ID are 1 through 4095.
The IP subnet-based VLAN entry is enabled when you click on "Save". The
“Delete: button can be used to undo the addition of new IP subnet-based VLANs.
Buttons
: Click to add a new entry in mapping table.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page immediately.
131