PLANET XGSW-28040 - Manual (Page 314)

User’s Manual of XGSW-28040
The page includes the following fields:
General Settings
Object Description

Enable Loop
Protection
Controls whether loop protections is enabled (as a whole).
 Transmission Time The interval between each loop protection PDU sent on each port. valid values
are 1 to 10 seconds.

Shutdown Time The period (in seconds) for which a port will be kept disabled in the event of a
loop is detected (and the port action shuts down the port). Valid values are 0 to
604800 seconds (7 days). A value of zero will keep a port disabled (until next
device restart).
Port Configuration
Object Description

Port The switch port number of the port.
 Enable Controls whether loop protection is enabled on this switch port.
 Action Configures the action performed when a loop is detected on a port. Valid values
are Shutdown Port, Shutdown Port and Log or Log Only.

Tx Mode Controls whether the port is actively generating loop protection PDU's, or
whether it is just passively looking for looped PDU's.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.16.2 Loop Protection Status
This page displays the loop protection port status the ports of the switch, screen in Figure 4-16-2 appears.
Figure 4-16-2 Loop protection status screenshot
314