PLANET XGSW-28040 - Manual (Page 460)

User’s Manual of XGSW-28040
Example:
Add MST1 in vlan1.
XGSW-28040:/>stp msti add 1 1
STP Port Configuration
Description:
Show STP Port configuration.
Syntax:
STP Port Configuration [<port_list>]
Parameters:
<port_list> : Port list or 'all'. Port zero means aggregations.
Example:
Show STP status of Port1
XGSW-28040:/>stp port configuration 1
Port Mode AdminEdge AutoEdge restrRole restrTcn Point2point
---- -------- ------------------ ------------------ -----------
1 Disabled Disabled Enabled Disabled Disabled Auto
STP Port Mode
Description:
Set or show the STP enabling for a port.
Syntax:
STP Port Mode [<port_list>] [enable|disable]
Parameters:
<port_list> : Port list or 'all'. Port zero means aggregations.
Enable : Enable MSTP protocol
Disable : Disable MSTP protocol
Default:
460