PLANET XGSW-28040 - Manual (Page 486)

User’s Manual of XGSW-28040
6.13 Quality of Service Command
QoS Configuration
Description:
Show QoS Configuration.
Syntax:
QoS Configuration [<port_list>]
Parameters:
<port_list> : Port list or 'all', default: All ports
QoS Port Classification Class
Description:
Set or show the default QoS class.
If the QoS class has been dynamically changed, then the actual QoS class is shown in parentheses after the configured
QoS class.
Syntax:
QoS Port Classification Class [<port_list>] [<class>]
Parameters:
<port_list> : Port list or 'all', default: All ports
<class> : QoS class (0-7)
Default Setting:
0
Example:
Set default QoS class in 1 for port 1
XGSW-28040:/>qos Port Classification Class 1 1
QoS Port Classification DPL
Description:
Set or show the default Drop Precedence Level.
486