PLANET XGSW-28040 - Manual (Page 370)

User’s Manual of XGSW-28040
6.5 VLAN Configuration Command
VLAN Configuration
Description:
Show VLAN configuration.
Syntax:
VLAN Configuration [<port_list>]
Parameters:
<port_list> : Port list or 'all', default: All ports
Example:
Show VLAN status of port1
XGSW-28040:/>vlan configuration 1
VLAN Configuration:
===================
Mode : IEEE 802.1Q
Port PVID IngrFilter FrameType LinkType Q-in-Q Mode Eth type
---- ---- ---------- ---------- -------- ----------- --------
1 1 Disabled All UnTag Disable N/A
VID VLAN Name Ports
---- -------------------------------- -----
1 default 1-28
VID VLAN Name Ports
---- -------------------------------- -----
VLAN forbidden table is empty
VLAV PVID
Description:
Set or show the port VLAN ID.
370