ProSoft Technology MVI69-DNP User Manual
Page 36
![background image](/files/866098/content/doc036.png)
MVI69-DNP ♦ CompactLogix or MicroLogix Platform
Configuring the MVI69-DNP Module
DNP 3.0 Master/Slave Communication Module
Page 36 of 129
ProSoft Technology, Inc.
November 3, 2008
When the configuration file has been transferred to your PC, the dialog box
will indicate that the transfer is complete.
6 You can now open and edit the file in a text editor such as Notepad. When
you have finished editing the file, save it and close Notepad.
Important: You must name this file DNP.CFG before you transfer it to the module. The module will
not recognize configuration files with any other name or extension.
2.5.2 Transferring the Configuration File to the Module
Perform the following steps to transfer a configuration file from your PC to the
module.
1 Connect your PC to the Configuration/Debug port of the module using a
terminal program such as HyperTerminal. Press [?] to display the main
menu.