ProSoft Technology MVI69-DNP - Manual (Page 69)

Reference MVI69-DNP ♦ CompactLogix or MicroLogix Platform
DNP 3.0 Master/Slave Communication Module
ProSoft Technology, Inc. Page 69 of 129
November 3, 2008
5 Reference
In This Chapter
™ Product Specifications ........................................................................... 69
™ Functional Overview.............................................................................. 72
™ Cable Connections ................................................................................ 89
™ Error Status Table ................................................................................. 95
™ Internal Indication Word....................................................................... 103
™ DNP V3.00 Device Profile Document .................................................. 104
™ DNP Subset Definition - Slave............................................................. 105
™ DNP Subset Definition - Master........................................................... 112
5.1 Product Specifications
The MVI69 DNP 3.0 module is a single slot, backplane compatible DNP 3.0
interface solution for the CompactLogix platform. This module provides highly
configurable support of both DNP 3.0 Master and Slave implementations (level 2
minimum), allowing the many SCADA and field devices supporting the DNP
protocol to be integrated into the powerful CompactLogix platform.
The module supports DNP Subset Level 2 features and some of the Level 3
features allowing the many SCADA and field devices supporting the DNP
protocol to be integrated into the CompactLogix platform. The module acts as an
input/output module between the DNP network and the CompactLogix processor.
The data transfer from the CompactLogix processor is asynchronous from the
actions on the DNP network. Databases are user defined and stored in the
module to hold the data required by the protocol.
5.1.1 General Specifications
ƒ Single Slot - 1769 backplane compatible
ƒ The module is recognized as an Input/Output module and has access to
processor memory for data transfer between processor and module
ƒ Ladder Logic is used for data transfer between module and processor.
Sample ladder file included.
ƒ Configuration data obtained from configuration text file downloaded to
module. Sample configuration file included.
ƒ Supports all CompactLogix processors: L20/L23/L30/L31/L32/L35, L43 and
L45 (L43 and L45 supported with RSLogix 5000 v16.03 or later)
ƒ Also supports MicroLogix 1500 LRP