Primera LX610 Color Label Printer with Plotter & Cutter - Manual (Page 111)

111
2. Click the + to create a new size.
3. Enter the actual width and height of your label stock.
4. Set all margins to zero.
5. Rename the size the same as the width and height.
6. Your custom size will now appear at the bottom of the preset size list in this application and
any other application on this Mac.
Set Width and Height Rename
Set all Margins to zero Click “+” to start create a new size
Note: If you need to overbleed your image to achieve complete
coverage of your label, you would use this process to create a
custom size which is .03” (or less) larger than your actual label
stock. For Example 4.03” x 3.03” for a 4” x 3” label.