Primera LX610 Color Label Printer with Plotter & Cutter - Manual (Page 37)

37
Note about Magnetic Media. The recommended starting knife pressure for the magnetic media is 22. This
media is not meant to be cut all the way through because there is no liner. Instead, this knife pressure
setting is meant to score the magnetic media so that it can be removed by hand after printing. In some
cases, it may be necessary to tear the outer excess material from the intended shape.
If you do cut all the way through this media, it can damage the wear strip, break the knife tip or cause media
jams.
3B Using the Cost Estimator
The cost estimator is found under the queue section on the first tab of the PrintHub. The last five
job costs are stored in the list. Each job will show the cost per label based on the cost per cartridge
entered below the list. Enter the actual cost of the cartridge you paid. Prints remaining on the
currently installed cartridge and total prints on new cartridge are both displayed.
To see a printable/savable report click on the document icon next to the job you want to see. A
report will display the information. You can print or save the report from this screen. You can also
change the currency using the drop down, change the job name or adjust the cost from this screen.