Primera LX610 Color Label Printer with Plotter & Cutter - Manual (Page 27)

27
6. Guide the leading edge of the roll into the feed area. Move the blue guide so that it touches
the label stock.
7. Push until the printer detects the stock, grabs it and pulls it through the printer.
Blue Guide
Gap Sensor Position Indicator
from right edge of media. The
position indicator corresponds
to the ruler NOT the installed
label stock.
Gap sensor
should intersect
the gap between
labels
Note the position of the label sensor. Slide
the sensor position indicator so that it
intersects with the gaps between your labels.
For most label stock you will not need to
move this.