Primera LX610 Color Label Printer with Plotter & Cutter - Manual (Page 123)

123
Instructions:
Cleaning Cards are used to clean the output cutter wheel that cuts between each label or at the end of a
group of labels. If the cutting wheel cuts through continuous adhesive backed paper (such as LX610 digital
die cutting media), it can accumulate adhesive build-up that will eventually cause cutting problems.
Recommend Cleaning Interval: Every 2000 Labels. PrintHub software tracks this and will alert you when
cleaning is necessary.
2. Locate the cleaning card. 1. Peel off the protective strip covering the
adhesive.
3. Unload label stock from the printer. Insert the
cleaning card into the front output of the
printer. 4. When the exposed adhesive strip is aligned with
the output cutter path, open PrintHub
– Select
Printer Settings – Advanced. Click on Output
Cutter Cleaning. Once the cutter cycles, remove
both parts of the card from the printer.