Primera LX610 Color Label Printer with Plotter & Cutter - Manual (Page 52)

52
4D Tutorial How to setup a Print and Cut in PTCreate Standard
This tutorial will walk you through the basic steps to print and cut a label.
4D.1 Choosing a Label Size (Page Layout)
After you activate your software you will be prompted to open or create a new project.
1. Choose New Project…
2. Set your page size. Since all die cutting media is 4.25” wide the standard maximum width is
automatically set to 4.25. In this example we have set the size to 4.25 x 3 to accommodate
approximately a
4” x 3” label.
Tip! Set your page larger than the
label size to be cut. This will allow
you to create a bleed around the
label so that you always cut inside
your print and get perfect cut every
time.