Primera LX610 Color Label Printer with Plotter & Cutter - Manual (Page 118)

118
calibrated for a 2mm margin. A larger margin around the label will cause a right side space. Page
Size. Often the page size is not large enough for the label. If this is the case you may see white space
on the right side of the label and no image overlap on the opposite side. This indicates that the page
size needs to be increased. Increase the page size through the printer preferences enough to cover
the label.
7B Solving Cut Alignment Offset Problems
Cut alignment is calibrated at the factory. However, it is possible that you may need to adjust the
cut line position for certain prints/cuts.
Adjust Cutter Offsets by opening Primera Print Hub. Go to the Printer Settings tab. Click on the
Advanced Settings button. Adjust cutter offsets according to the diagram below. To move the cut
to the right increase the Horizontal Offset. To move the cut to the left decrease the Horizontal
Offset. To move the cut up increase the Vertical Offset. To move the cut down decrease the
horizontal offset. Remember the top of your document prints first so it prints upside down if you
are standing in front of the printer.