Primera LX610 Color Label Printer with Plotter & Cutter - Manual (Page 32)

32
4. Locate a new cartridge and remove it from its packaging. Remove the foil outer package and
the tape covering the nozzles.
5. Place the new cartridge into the empty carriage. Note: When installing the cartridge, tilt the
cartridge at a slight backward angle of approximately 30 degrees.
6. Make sure the cartridge is pushed back far enough so the ridge on the cartridge is behind
the spring-loaded pusher on the lid. Push down on the cartridge. Close the lid on the
cartridge by lightly pressing down from the top until you hear a click.
PUSH DOWN