Primera LX610 Color Label Printer with Plotter & Cutter User Manual
Page 57
57
4.
Once the cut line is in place you can adjust its size and positon. Whatever size you choose
will be the exact size of final cut label. A typical overbleed is 1/16”. This will ensure that the
cut is completely within the printed label every time so you have no white space around the
edges.
a.
First select the cut line using the arrow tool.
TIP:
If you are having trouble selecting
the object, first select any object and then press the TAB key to move the selection
from object to object.
b.
Then change the size. Adjust the size to 1/16
(.0625”) less than th
e height and width
of the print. In this example the cut file would be 3.937 x 2.937. You may have to
uncheck the Keep Proportions box.
c.
Finally adjust the position by centering horizontal and vertical alignment to Page.